GAT ECO.Side Lock 7010 (NW) F/ISO
Installation
www.gantner.com
HB_GAT-ECOSide-Lock7010-FISO--EN_11
25
3.11 Installation in Lockers with Metallic Doors
For lockers with metallic doors, the GAT ECO.Side Lock 7010 F/ISO is mounted on the left or right inner locker wall
depending on whether it is a right or left-hinged locker door. Two cutouts must be made in the locker door - one in the
inner door sheet and one in the outer door sheet. The two parts of the GAT NET.Lock Bolt Set 7200 are then mounted
into the locker door. See the diagram below and the following installation instructions.
1. GAT ECO.Side Lock 7010 F/ISO
2. GAT NET.Lock Bolt Set 7200
3. 3 x mounting screws for the GAT ECO.Side Lock 7010 F/ISO
5. Door contact
6. 4 x mounting holes for the GAT NET.Lock BoltSet 7200
7. LED position
8. Cutout for GAT NET.Lock Bolt Set 7200
9. Cutout for label carrier
10. Label carrier
Figure 3.11 - Installation in a locker with metallic, right-hinged door (dimensions in mm
– inches shown in brackets)
Summary of Contents for GAT ECO.Side Lock 7010 F/ISO
Page 63: ......