background image

 

 

Gantom Juni User Guide 

Version 1.0 – 3/31/2021 

GANTOM JUNI USER GUIDE 

 

 

At less than 130mm (5 inches) in length, Juni is the smallest framing projector on the market. 
Gantom collaborated with top lighting designers in themed entertainment and architecture to create 
the most precise lighting tool for space-constrained environments. With zoom optics and multiple 
mounting configurations, Juni provides specifiers with design flexibility in a wide range of 
applications. For permanent installations, every adjustable mechanism is fully lockable (including 
shutters) to assure fixture focus when the designer steps away.  All this in a fixture that’s smaller than 
your smartphone! 
 
Juni has a matte-black anodized aluminum finish with silver available by custom quotation. Juni is 
available in 12VDC PWM or DMX (see Juni DMX) dimming options. There are 3 available mounting 
options: standard screw-mount yoke, recessed canopy, and track. 

 
Features

 

o

 

Ultra-compact design < 130mm (5 inches) long 

o

 

Class 2, low-voltage 12VDC input (DO NOT HOT PLUG) 

o

 

Adjustable zoom and focus lenses 

o

 

Interchangable lens tubes with a beam angle range of either 25-38° or 42-60°  

o

 

3000K 90CRI or 6000K LED options available 

o

 

Tri-plane shutter system 

o

 

Accepts 19mm steel or glass gobo (up to 2mm thick) 

o

 

Dims with most dimmable 12VDC power supplies 

o

 

Machined aluminum body in silver or black finishes 

o

 

Track adapter and canopy mount available 

Available Models:

 

Item Number 

Item Description 

GT81 

Gantom Juni  - Cool White - Black Finish - Pro Cable Connector 

GT82 

Gantom Juni  

– Warm White - Black Finish - Pro Cable Connector 

GT83 

Gantom Juni  - Cool White - Black Finish 

– Wide Lens - Pro Cable Connector 

GT84 

Gantom Juni  

– Warm White - Black Finish – Wide Lens - Pro Cable Connector 

TL281 

Gantom Juni  - Cool White - Black Finish - Eutrac Low Voltage Adapter 

TL282 

Gantom Juni  

– Warm White - Black Finish - Eutrac Low Voltage Adapter 

TL283 

Gantom Juni  - Cool White - Black Finish 

– Wide Lens - Eutrac Low Voltage Adapter 

TL284 

Gantom Juni  

– Warm White - Black Finish – Wide Lens - Eutrac Low Voltage Adapter 

Distributor: 

www.techni-lux.com

Phone: 407-857-8770

Fax: 407-857-8771

Email: sales@techni-lux.com 

 

Summary of Contents for Juni











Reviews: