３０
System Setting
System Setting
You can configure the settings of date/time, system management, and keyboard controller.
Date/Time
Specify the current date and time.
1. From
<SYSTEM SETUP> - <SYSTEM>
, select
<DATE/TIME>
.
2. Use the
[▲▼
◀▶
/ENTER]
buttons on the remote
control or use the mouse to change the time or set
the options as necessary.
>DATE/TIME : Set the current time and date.
Click< > to adjust the time manually.
>DATE FORMAT : specify the date format.
>TIME FORMAT : specify the time format.
>TIME SERVER : obtain the current time from the
time server. Click < > to get the current time.
>AUTO TIME SYNC : automatically synchronize the
time with the time server at a specific time.
>SYNC AT : Set the time to sync with the time server.
>TIMEZONE : specify the GMT standard time for your local area.
>DST : You can set up or release the DST (Daylight Saving Time).
Both
<TIME SERVER>
and
<AUTO TIME SYNC>
will be enabled only if the DVR is
connected to the Internet.
3. To apply the change, click
<APPLY>
in the bottom of the screen.
4. When done, press the
[EXIT]
button on the remote control or click
<CLOSE>
in the lower
screen. The confirmation message appears and you will return to the previous menu.
