44
SYSTEM SETUP
EVENT / SENSOR
From the ‘
System Setup
’ menu, click on the
‘
EVENT / SENSOR
’
menu.
EVENT / SENSOR - HDD EVENT
Click on the
‘
HDD EVENT
’
menu, and choose any field.
. Use the button to modify the value.
The DVR will continually monitor the health of the hard drives in the system and detect problems that may be developing.
SMART ALARM:
Enables S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) hard disk monitoring.
CHECK INTERVAL:
Frequency of testing.
DISK FULL EVENT:
Determines whether a ‘Disk Full’ condition would result in a HDD event.
EVENT / SENSOR - ALARM INPUT
Click on the
‘
ALARM INPUT
’
menu, and choose any field.
Use the button to modify the value.
The menu will determine the behavior of each of the 16 alarm inputs.
OPERATION:
Alarm inputs can be enabled or disabled.
TYPE:
Alarm inputs can be set as normally open (N/O) or normally closed (N/C).
