22
DISPLAY
:
To setup the various display options, highlight DISPLAY and press
ENTER
.
DISPLAY - OSD
STATUS BAR
: Turns the status bar at the bottom of the live display ON or OFF.
CAMERA TITLE
: Determines whether the camera title is displayed.
EVENT ICON
: Determines whether the DVR recording status is shown at the top right of each channel
window.
BORDER
: Determines whether there is a
border grid around each channel in multi-screen display mode.
BORDER COLOR
: If the border is ON, the operator can choose the color of the grid lines.
MENU TRANSPARENCY
: During menu setup, the live view can be seen behind the menu screen.
Changing this value determines whether the live view is more (higher value) or less (lower value) visible.
MOTION SENSOR DISPLAY
: If false motion recording is occurring, the operator can use this feature to
determine and rectify the cause in realtime.
OFF
– normal display mode.
ACTIVE
– areas where motion is detected are highlighted with colored blocks.
INACTIVE
– areas where no motion is detected are highlighted with colored blocks.
MOTION COLOR
: The color of the blocks displayed when MOTION SENSOR DISPLAY is set to
ACTIVE or INACTIVE.
MOTION TRANSPARENCY
: Determines the transparency of the colored blocks when MOTION
SENSOR DISPLAY is set to ACTIVE or INACTIVE.
To change any of these settings, highlight OSD and press
ENTER
to select. Use the
CURSOR KEYS
to
navigate to the option required. Press
ENTER
to select the option (the cursor changes to
yellow
) and use
the
CURSOR KEYS
to change the setting.
Click
APPLY
to save the setting or
PREVIOUS
to cancel.
SYSTEM SETUP
SYSTEM SETUP
Click the
OSD
menu. Click on a field to change its
setting.
Then click the button to toggle the setting.
