21
C
C
O
O
N
N
N
N
E
E
C
C
T
T
&
&
P
P
O
O
W
W
E
E
R
R
O
O
N
N
• Connect up to 16
CAMERA INPUTS
as necessary.
• Connect one or more monitors to the DVR using the
COMPOSITE
,
VGA, S-Video and HD MONITOR
connections.
• Connect power to the DVR, using the provided AC power cord or DC 12V Power Adapter (depending on model).
The DVR will check for proper power connection and emits two beeps if system power test is OK.
• Press the
POWER BUTTON
on the front panel of the DVR to begin operation.
- The DVR startup screen detects and checks the status
of hard drive and the CD-RW / DVD-RW drive.
- After startup diagnostics are complete, the operator must
login to the system. The default user name is ‘
ADMIN
’.
- Using the
CHANNEL SELECTION
buttons, key in the digits of
the default password (‘
1234
’) and then press the
ENTER
button.
- After DVR startup, the system will show the default display of
all 16 channels in a standard 4x4 Screen Division mode.
- The status bar at the bottom of the screen shows the current
Date/Time and the percentage of Hard Drive capacity used.
- The title for each channel is shown.
- A red recording icon and the letter ‘C’ in the top right of each
channel display shows that the channel is recording in
Continuous / Schedule mode.
