43
SYSTEM SETUP
NETWORK
From the ‘
System Setup
’ menu, click on the
‘
NETWORK
’ menu.
NETWORK- IP SETUP
Click on the
‘
IP SETUP
’
menu.
DHCP
: When enabled, the DVR will obtain an IP address automatically from a router or DHCP server, upon reboot.
WEB SERVICE
: When enabled, allows remote connections using Internet Explorer or other compatible web browsers.
IP ADDRESS
: If DHCP is not being used, the IP address can be manually set by the user.
GATEWAY
: If DHCP is not being used, the gateway IP address can be manually set by the user.
SUBNET MASK
: If DHCP is not being used, the subnet mask can be manually set by the user.
1ST DNS SERVER
: If DHCP is not being used, the first DNS server can be manually set by the user.
2ND DNS SERVER
: If DHCP is not being used, the second DNS server can be manually set by the user.
RTSP SERVICE PORT
: If the connected Router supports UPnP (Universal Plug and Play) functionality, when you click
‘
AUTO PORT
’, the port forwarding is automatically configured and also can delete the port &
test the port whether working or not.
WEB SERVER PORT
: If connected Router support UPNP (Universal plug and play) function,
when you click the AUTO PORT, the port forwarding is automatically setup.
And also can delete the port.
The port number that the DVR uses to support remote connection from Internet Explorer
or other compatible web browsers.
ALIAS:
When you enter the DDNS HOST NAME within DDNS setup (
see next page
), you can see the DDNS
Information, for example: http://1234.dvrlink.net:8080
MAX TX SPEED
: Specifies the maximum bandwidth that the DVR can use during a remote connection.
