Installation Guide
37
4.3.3
In-Ceiling Mounting with Ceiling Panel
To mount the PTZ camera to a suspended ceiling with the T-Bar, the ceiling panel
could be employed, as shown in the figure below.
Follow the steps below for installing the ceiling panel.
Step 1: Cut the ceiling half.
Step 2: Put the ceiling panel upward to the ceiling opening.
Step 3: Attach and fasten the T-Bar mount onto the panel (Refer to
4.3.2 In-ceiling
Mounting
for further details).
4.3.4
Ceiling Mounting with Straight Tube (ZCA-ST25/ST50)
The straight tube is available in different length: 25 cm and 30 cm. Procedures of
mounting the indoor and outdoor cameras with the straight tube will be described
respectively as follows.
Indoor PTZ Camera:
Items Needed
•
PTZ Camera
•
Data Cable (supplied)
•
Straight Tube and other equipped items (optional accessory)
•
Indoor Mount Kit and attached components (optional accessory)
•
Screws and Screw Anchors for fixing the straight tube onto the ceiling (not
supplied)
Tools Needed
•
Tool for drilling
•
Tool for screwing
Follow the steps to mount the PTZ Camera with the Straight Tube.
1)
Ensure that the ceiling can support the weight of the PTZ Camera and Straight
Tube.
2)
Make a cable entry hole on the ceiling.
Summary of Contents for ZC-PT series
Page 1: ......
Page 76: ...Installation Guide 75 ...
