Installation Guide
45
4.4.2
Standard Pendent Mount
Indoor PTZ Camera:
Items Needed:
•
PTZ Camera
•
Data Cable (supplied)
•
Standard Pendent Mount and equipped items (optional accessory)
•
Indoor Mount Kit (optional accessory)
•
Waterproof Rubber (Indoor Mount Kit’s accessory)
•
Screws and Screw Anchors for fixing the Standard Pendent Mount onto the
ceiling (not supplied)
Tools Needed:
•
Tool for drilling
•
Tool for screwing
Follow the steps below to mount the PTZ Camera with the Standard Pendent Mount.
1)
Make a cable entry hole on the wall to recess the cables. Otherwise, users could
push up the cable entry board on the Standard Pendent Mount’s mounting plate
to place the cables (see the illustration in section
4.4.1 Mini Pendent Mount >
Step 1
).
2)
Fix the Standard Pendent Mount on the wall with proper screws and screw
anchors.
3)
Attach the Waterproof Rubber to the Standard Pendent Mount.
4)
Run the cable(s) through the Standard Pendent Mount with the Data Cable’s
22-pin cable coming out of the outlet.
NOTE:
Please block the cable entry hole with the supplied sponge to
avoid insects entering the Pendent Mount. See the illustrations in section
4.4.1 Mini Pendent Mount > Step 4
.
5)
Thread the cable(s) through the Indoor Mount Kit and join the Indoor Mount Kit to
the Standard Pendent Mount with the supplied screws and washers. Then adjust
the Waterproof Rubber to the joint.
6)
Connect the cable(s) to the PTZ Camera.
7)
Join the PTZ Camera to the Indoor Mount Kit with the supplied screw and
washers.
Summary of Contents for ZC-PT series
Page 1: ......
Page 76: ...Installation Guide 75 ...
