Installation Guide
67
6. System
Integration
The PTZ Camera is allowed to be integrated into other suppliers' surveillance
systems with large set of built-in protocols. Refer to the following sections for more
information.
6.1
Using Pelco Keyboard
The PTZ Camera can be controlled through the Pelco keyboard. Please follow the
instructions below to manipulate the camera.
Open the OSD
<9 5> + hold <Preset>
<7 7> + <Preset>
Press the keys, <9 5> + hold <Preset> or <7 7> +
<Preset>, to display the OSD menu.
ENTER
Iris Open
<9 5> + hold <Preset>
To send a “ENTER” command, press <Iris Open> or <9
5> + hold <Preset>.
Set and execute PRESET
Hold <Preset>
To set “Preset”, hold the key <Preset>.
<Preset>
To execute a preset position, press the key <Preset>.
Set and execute SEQUENCE
By OSD
To set “Sequence”, please enter the OSD and go to the
Preset setting menu.
<7 0~7 8> + <Preset>
The following Presets allows you to execute Sequence
quickly.
***<7 0> + <Preset>: Sequence 1
<7 1> + <Preset>: Sequence 2
.
.
.
<7 6> + <Preset>: Sequence 7
<7 8> + <Preset>: Sequence 8
***<7 7> + <Preset>: Reserved; also used to Open
OSD
Set and execute CRUISE
Hold <Pattern>
To set “Cruise”, hold the key <Pattern>.
<Preset>
To execute “Cruise,” press the key <Pattern>.
Summary of Contents for ZC-PT series
Page 1: ......
Page 76: ...Installation Guide 75 ...
