User’s Manual
36
NOTE:
Flip setting is manual-controlled only. If a Preset or a point for
other function (ex. Sequence) is set in the position that can only be
reached through FLIP motion, when Flip is off, the position cannot be
reached anymore.
OFF
Select this option to disable the flip function.
NOTE:
To
make the PTZ Camera tilt between a specific range, such
as -10° to +100° or -10° ~ +190°, please go to ANGLE ADJUSTER
(see next section) to
set the angle range of tilt.
Otherwise, the
camera will tilt 90° as the default setting.
•
ANGLE ADJUSTER
The item is for adjusting the angle range of tilt motion. The Range of the view
angle varies in different FLIP modes: the angle ranges from -10
°
to +100
°
in
the M.E. FLIP and FLIP OFF modes, and from -10
°
~ +190
°
in the IMAGE
FLIP mode.
•
SPEED BY ZOOM
If the option is set to <ON>, the pan/tilt speed will be automatically adjusted
by internal algorithm when zooming. The larger zoom ratio results in a slower
rotation speed.
•
AUTO CALI. (Auto Calibration)
There are one horizontal point and one vertical infrared rays check point in
each PTZ Camera. During installation or maintenance, the PTZ Camera’s
position may be moved. Therefore, the relative distance between the original
set point and the check point will be changed. If enable the Auto Calibration
function, the camera will automatically detect the matter and reset the
horizontal point back to the original position.
ANGLE ADJUSTER
ADJUST MIN ANGLE -10 DEG
ADJUST MAX ANGLE 100 DEG
EXIT+SET
YES
Summary of Contents for ZC-PT series
Page 1: ...English Version 1 1 6 r4 ...
Page 73: ...User s Manual 72 ...
