User’s Manual
48
•
OFF
Select the item to disable IR function.
NOTE:
When Alarm Detect function (see section
3.3.19 ALARM
DETECT
) is turned on, IR function will automatically switch to ON/OFF
mode.
Sub-menu of IR Function:
THRESHOLD
The PTZ Camera will remove the filter immediately when the threshold value
is reached. For the 23× model, the threshold options are <LOW>, <MID> and
<HI>. <LOW> threshold indicates a higher sensitivity and can improve
reliability of lens so that it is easier to switch to Day mode and relatively
difficult to change into Night mode; while <HI> indicates that it is easier to
switch to Night mode and difficult to change into Day mode. For the 35×
Model, the IR threshold value ranges from <1> ~ <13>. At value <1>, the
camera will be most inclined to convert to color mode from B/W mode, while
at value <13>, the camera comparatively tends to stay in B/W mode.
IR COLOR
When the IR blocking filter is removed, the video output can be programmed
as color or B/W (black and white). The color here refers to simulated color,
not real color. This function is only applicable in IR ON mode.
Exit
Exit the IR function menu and go back to the
MAIN PAGE 3
to carry on setup
of alarm setting.
IR FUNCTION
THRESHOLD
LOW
IR
COLOR
COLOR
EXIT
＋
SAVE
YES
MAIN PAGE 3
IR FUNCTION AUTO
ALARM SETTING
ENTER
ALARM DETECT
OFF
WDR FUNCTION
OFF
PRIVACY MASK
ENTER
TIME SETTING ENTER
SCHEDULE ENTER
EXIT OSD
YES
Summary of Contents for ZC-PT series
Page 1: ...English Version 1 1 6 r4 ...
Page 73: ...User s Manual 72 ...
