50
6. AWS S3 Upload
AWS S3 Upload action uploads event snapshots to AWS S3 storage when an application event
occurs. The passkey value for the storage storing the snapshot file can be set using event
metadata.
AWS S3 Upload Action can be added from the Action settings. Select the Action Type to
AWS S3
,
then, the relevant settings at the bottom.
6.1 Snapshot Time Range Settings
1. Set the time range for uploading snapshots based on the time of the event.
In the example set above, snapshots taken from 2 seconds before the event to 1 second after the
event will be uploaded. Periodic snapshots are taken at least once per second for each channel,
in addition to event snapshots.
6.2 Snapshot Upload File Path Settings
•
File Path
: Specify the path where the snapshot is stored.
o
Event metadata can be included in this setting. Setting the path to include time
metadata, as in the example above, sets the upload file path based on the time
the event occurred.
o
Set a file path excluding the Region and Bucket parts. You only need to set the
path within the bucket where the file will be saved.
•
After setting the file path, the Example section shows an example snapshot path.
