36
1.2.4 Save, Load, And Reset the Settings
1.
Save : Click the
button at the bottom of the screen to save the position and
size information of the filter setting.
2.
Load : Click the
button to load the most recently saved information of the
filter that is set on that channel.
3.
Reset : Click the
button at the bottom left of the screen to delete and reset the
filter settings for that channel.
2. Exclusion Area
Exclusion zones can be used to filter out the same type of false detection that is consistently
occurring in the same location. Objects in the area you added as an exclusion zone will be
ignored and will not trigger an event.
2.1 Exclusion Zone Settings
1.
Click the “False Alarm Reduction > Exclusion Area” in the sidebar menu to access
the settings menu.
2.
Select the channel you want to exclude.
3.
Click the
button to create an exclusion zone. Up to 10 zones can be set.
