PixelPro GXi Series
ZN-DNT352XE Series Installation Guide
03-2014-B
20
6.3. Reset
1.
Press the reset button for 2 seconds while the device is in use.
2.
Wait for the system to reboot.
Caution
!
Please do not hold for more than 2 seconds. Otherwise, the camera may be
switched to its Factory Default settings.
6.4. Factory Default
Resetting the device back to the factory default will initialize all parameters including the IP
address back to the factory defaults. To reset back to the factory default:
To proceed back to the Factory Default reset:
1.
Press the reset button and hold.
2.
Release the button after 10 seconds.
3.
Wait for the system to reboot.
Note
i
The factory default settings can be inferred as follows:
IP address:
192.168.xx.yy
Network mask:
255.255.0.0
Gateway:
192.168.0.1
User ID:
root
Password:
pass
Summary of Contents for ZN-DNT352XE SERIES
Page 1: ...03 2014 B 1 ...