11
3.
Displaying Issues & Solutions.
3.1 How to do when it's indicating '' No Signal--Saving Power''
1.Please kindly note that
‘’
No Signal
’’
issue is related to the HDMI connection. Please make sure the
HDMI cable is well connected between PD1161 & computer.
2.If using windows computer, please press
‘’
p
’’
on keyboard, and make sure to choose
“
Duplicate
”
or
”
Extended
”
mode. Don
’
t choose
‘’
Projector Only
’’
or
‘’
Computer Only
’’.
Otherwise,
it will cause no signal problems.
3.If you are using a HDMI adaptor.
It
’
s best to use DVI/VGA/Display Port/type-c to HDMI adapter depending on whichever is on your
device. Please remember don
’
t use usb to HDMI adapter, because USB is mainly for data
transmission. It
’
s not good for video/signal transmission.
4.If there has no HDMI interface on the computer, please change another computer which comes
with HDMI port and make sure to plug the HDMI cable into graphic card, but not in mother board.
If the No Signal issue remains after trying above solutions, please take a video and send to
GAOMON SERVICE. We will apply warranty and make everything right for you. Don
’
t worry!
3.2 How to do when it's all black without displaying anything, and no
indicator light.
1.Please kindly note that, if it doesn
’
t display anything and no indicator light, it should be related to
the power cord connection. Please kindly check whether you have well connected the power cord.
2.Please change a different electricity socket.
3.If the issue remains, please take a video, and send to GAOMON SERVICE. We will apply warranty
and make everything right for you. Don
’
t worry!
