background image

QUICK         
MOUNTS

     

THE  EASY  WAY  TO  RAISE  &  LOWER  YOUR  ANTENNA

SAFETY NOTICE

WARNING! 

POWER LINES CAN KILL.

DO NOT ERECT ANY ANTENNA OR MAST NEAR ANY OVERHEAD WIRES, UNDER ANY 
CIRCUMSTANCES.  READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY:

1

) Do not erect  ANYTHING  near any overhead wires.  Assume all such wires to be power lines and 

deadly.

2

) Request advice from your local power company, if power wires are anywhere near the proposed 

installation.

3

) If the antenna or mast falls, do not try to stop it.  Get out of the way.

4

If any part should touch overhead wiring, DO NOT TOUCH IT!  Call the power company 

immediately for help

.

5

In the event of an accident involving power wiring:

DO NOT TOUCH THE VICTIM DIRECTLY.

  Send someone for help.  

6

) Select a site which limits public access to the antenna or your mast.  If any possibility exists that people 

or pets could touch the antenna, place a small wooden fence around the site after installation.

7

) Choose a calm (no wind), dry day to erect the antenna.

8

) Always enlist the aid of at least one person in erecting the antenna.

9

) Do not use or stand on a ladder in the process of erecting your antenna or mast.  A ladder is not needed 

and could be dangerous.

10)

 Do not connect the antenna coax until the antenna is firmly mounted.

11) 

Completely read the entire instruction manual before preceding with the assembly.

1

Summary of Contents for Quick-Tilt

Page 1: ...all the power company immediately for help 5 In the event of an accident involving power wiring DO NOT TOUCH THE VICTIM DIRECTLY Send someone for help 6 Select a site which limits public access to the antenna or your mast If any possibility exists that people or pets could touch the antenna place a small wooden fence around the site after installation 7 Choose a calm no wind dry day to erect the a...

Page 2: ... upon your soil conditions and how tall your mast or antenna will be and how much wind load it will incur Wind load should not be a major concern because the purpose of the Quick Tilt mount is to make it easier and quicker for you to be able to get your mast antenna or flagpole up and down Therefore if a storm is approaching high winds are expected or the structure will not be in use then lower it...

Page 3: ...p slide this 3 8 bolt through the support bracket keeper and other support bracket and secure it with another of the large wing nuts After locking your structure in place you can now go ahead and insert the stainless bolt Push this bolt through the support bracket and slide another 1 spacer over the bolt as you continue to push this bolt through the small holes in the keeper As the bolt passes thr...

Page 4: ... of any other warranty expressed or implied This warranty is void if the product is subject to misuse improper installation accident neglect modification repairs or act of God GAP Antenna Products Inc shall assume no liability for incidental or consequential damages resulting from the purchaser s ownership of it s products Replacement Parts Replacement parts are available for any portion of the Qu...

Reviews: