22
GarageSmart
TM
User’s Manual
Alternate Mounting
The
GarageSmart™ GS100-CR can also be mounted upside down for installations requiring
bottom ended connections.
1. Remove the existing mechanical 3-button wall switch from the wall.
2. Remove the cover of the GarageSmart
™ device and using screws (not included),
secure the GarageSmart
™ GS100-CR (with the buzzer towards the top of the
enclosure) to the wall using the mounting holes as shown below.
3. Remove the buzzer connector from the J4 terminal of the PCB, then remove the (4)
PCB screws from the bottom enclosure.
Mounting Hole
Mounting Hole
PCB Screw
PCB Screw
PCB Screw
PCB Screw
J4
Buzzer