3
3.2.
Installation sketch map
As figure 1 shows the completed installation
：
3.3.
Sectional rail assembling
3.3.1.
Rail connection
Take out the sectional rails (as shown in Figure 2), put them in line on a clean and flat floor (as
shown in Figure 3).
Connect the sectional rails (as shown in Figure 4), finish it as shown in Figure 5.
3.3.2.
Fixing belt
As shown in Figure 6, install
the front support of the rail,
adjust belt so it’s a modest
tension.
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 1
