G
ENESIS
L
EAD
S
CREW REMOVAL AND REPLACEMENT
G
ENESIS
2006
M
ODEL
portant Notes:
lacement must include replacement of the Drive Nut,
he upper and lower bearing assemblies and the
Contact Garaventa for a list of
pa
In units 96” and greater, the stabilizer system must be removed with
e screw. We recommend that the stabilizer bushings be replaced
ilizer is supplied.
All
comp
Have the Genesis spare parts kit, a complete tool kit and the Genesis
Se
i
Ca t
•
•
e standard safety procedures.
Re o
“u
c
have clearance above the mast to
mu t
rance
ab
e
Before beginning, lower the carriage and platform, remove the
Platform mast-side wall, and the mast cover panels. Units that are
accessible behind the mast should
provide easier access to the mast internals.
Im
Drive screw rep
the Safety Nut, t
installation of a new grease canister.
rts required.
th
where a stab
ow at least one full day (8 hours) and a crew of two Technicians to
lete this procedure.
rv ce manual at hand before attempting this work.
u ion:
Do not work under an unsupported platform.
•
Turn off the mains and lock it off before starting.
•
Do not wear loose clothing, tool belts, long hair or jewelry while working on
a lift.
Follow th
m val of the Lead screw from a Genesis 2006 requires that it be
ns rewed” upwards out of the mast. It is therefore necessary to
allow for this. The top mast cap
s also be removed. You will need at least 300 mm of clea
ov the screw to remove it.
have those covers removed to
ITEM #05751 Revision B
Garaventa Lift, April 2008
12
