57
TZ FIBER 540E / 630E / Conveyor-E
Via Leonardo da Vinci, 32/B
36034 Malo (VI) Italia
Operation and maintenance manual
Rev. 01/18-GB
Fig. 11 - Tools
1) Tool to peak. - 2) Seeger ring.
2
1
as to preserve the battery life.
The power plug of the charger should be installed
near the equipment and be easily accessible.
In case of DC voltage supply, the connection be-
tween the charger and the power must not be of the
“fixed” type. In such case, provide with a connector
that allows disconnecting the device at any time.
ATTENTION
There is a risk of explosion if the battery is re-
placed by one with the incorrect type: use only
original batteries. Dispose of used batteries in
accordance with the applicable regulations and
bring them in the appropriate collection centers.
4.5 TOOLS
The tools installed on the disc are called peak (1
Fig. 11) and consist of a steel body molded in high-
carbon on which it is inserted in the hard metal tip
sintered at very high hardness; in this way you get
a tool with exceptional durability and service life,
even in the toughest conditions. Ideal on very dry
and/or stony ground.
They are all the same and are locked in place with
a Seeger ring (2 Fig. 11).
4.6 SET-ASIDE
If you plan a long period of inactivity, in order to keep
the machine intact in its organs, it is necessary to
park the machine on a firm, flat surface and within
a protected area, in order to prevent unauthorized
outsiders can approach indoor and do the following:
- Thoroughly wash the machine above ground and
then dry;
- Check that the machine is in perfect condition and
replace worn or broken parts;
- Protect all unpainted metal parts with lubricants,
then cover the machine with a sheet of plastic and
put it in a dry place.
If these operations are carried out carefully,
the advantage will be of those who will use the
machine upon return to work.
