TRENCHER
TZ S
Use and maintenance instructions – Spare parts Via L.da Vinci,32/B
Rev. 01.2013 - EN (translation of the original instructions)
3
36034 Malo (VI) Italy
T E Z A
TESTING AND COMMISSIONING CERTIFICATE
(to be compiled by the Manufacturer or Authorised Dealer)
The machine is already tested by the Manufacturer.
The machine is commissioned at the customer's facilities by the Manufacturer or Authorised
Dealer which also performs final adjustments and tests the correct operation of each
component. After final testing, the Manufacturer or Dealer compiles the testing and
commissioning certificate, see below. This is signed by the tester, the relative operator (or
another authorised operator) and the safety manager as confirmation of successful
commissioning.
THE CUSTOMER (EMPLOYER) MUST TAKE ALL THE MEASURES REQUIRED TO ENSURE
ITS EMPLOYEES DO NOT ENTER THE MACHINE COMMISSIONING AREA FOR ANY
REASON UNTIL FINAL TESTING HAS BEEN COMPLETED.
TESTING AND COMMISSIONING CERTIFICATE
Performed by: Manufacturer Authorised Dealer
Date: ……/……/……
MACHINE
CUSTOMER
Name: TZ S TRENCHER
Name:
Address:
Serial number:
Year of construction:
This is to certify that the machine in question was tested by an authorised tester:
Mr.………….………………………………….……………………………;
The machine ignition keys were given to the Customer or authorised operator under their own responsibility:
Mr.………….………………………………….……………………………;
Checking the machine starts correctly
Checking all the controls work correctly
Checking all the safety devices work and trip
correctly;
Performing some machine movements
Turning off the machine
Emergency stopping
Authorised tester
…………………………………………….……………..
Authorised customer or operator
…………………………………………….……………..
WARNINGS
DO NOT USE THE MACHINE UNTIL THE TEST CERTIFICATE HAS BEEN SIGNED.
SIGNING THE TEST CERTIFICATE VALIDATES THE CORRECT OPERATION OF THE MACHINE AND
THE ABSENCE OF ANY OBVIOUS FAULTS.
N.B.: THE ENTIRE TEST CERTIFICATE MUST BE COMPLETED, SIGNED AND POSTED OR FAXED TO
THE MANUFACTURER
.
