PP520 LED lighting controllers - User Manual
1
Getting started
This user manual describes the setting up and operation of the PP520
lighting controllers.
The PP520 is a two channel lighting controller that provides 2 Amps
continuously or 10 Amps pulsed. The controller is also available in a fast
pulsing variant that is identified by the 'F' suffix (refer to
).
Read
(or
, or
)
and
Section 13, Reference information
, and check the PP520 fulfils your
requirements.
Mount the PP520 as described in
, using a
DIN rail or the mounting holes. In particular, read the notes on heatsinking
in
.
Connect the PP520 up to a supply and an LED lighting unit as described in
. When the PP520 powers up, it should show two
alternating lines on the display to indicate that it is operating properly.
To configure the PP520, refer to
Section 9, Front panel configuration
to set
it up from its front panel or
Section 11, Webpage configuration
to use the
PP520's web pages. The commands that may be used with the Ethernet
connection are described in
Section 12, Command configuration
For additional information on the use of the PP520. Visit
to download a range of Application Notes.
—
5
—
