PP610/612 LED lighting controllers - User Manual
The PP610 shows that a trigger has been
received for one of the channels and the delay
period is running.
The PP610 shows that one of the channels is
being pulsed.
The PP610 is ready.
9.5
Extended Set -Up
Extended Set-Up allows all features of the PP610 to be set up. It is
entered by holding the
RANGE
button down for one second.
In order for the whole range of timing values to be entered, it is necessary
to specify whether the delay is in seconds or milliseconds. This is done by
selecting an exponent of
0
for seconds, or
–3
for milliseconds. The same
applies for setting the current values. Refer to the steps overleaf for how
this is set up.
Extended Set-Up allows the current to be set up in steps of 0.25mA,
whereas Simple Set-Up only allows 1mA steps.
—
31
—
