RC1xx LED Lighting Controllers - User Manual
—
8
—
3.4
Haftungsausschluss
Diese Angaben dienen lediglich der Orientierung. Der Monteur muss für
jede Installation eine eigene spezifische Risikobewertung durchführen.
Gardasoft Vision hat bei der Zusammenstellung dieser Empfehlungen
größtmögliche Sorgfalt walten lassen. Gardasoft Vision übernimmt über
das gesetzlich erforderliche Maß hinaus keine Haftung für Schäden aller
Art.
Vorsätzliche Gefährdungen und Vandalismus werden von diesem
Dokument nicht abgedeckt und sind vom Monteur zu berücksichtigen.
4
Mesures de sécurité
Veuillez lire la notice avant d’utiliser le RC1xx. Respectez toujours les
mesures de sécurité qui suivent. En cas de doute, contactez Gardasoft
Vision Ltd. Les symboles suivants sont utilisés dans ce manuel:
Attention:
Lisez les instructions pour comprendre quels sont
les risques éventuels.
Attention:
La surface peut devenir chaude.
Attention:
Risque d’électrocution.
Veuillez vous référer aux consignes du manuel pour connaître les
précautions à suivre au regard de ces symboles.
4.1
Chaleur
Assurez-vous que le RC1xx est monté correctement (voir Section 5,
“Mounting the RC1xx”) et que vous ne dépassez pas les charges pour l’unité
(voir Section 11.1,
À ces charges maximales, le boitier du RC1xx peuvent dépasser 65 °C, ce
qui est suffisant pour occasionner des brûlures en cas de contact. Assurez-
vous que le personnel ne peut pas y toucher accidentellement et que l’air
circule autour de l’unité.
4.2
Électricité
Le RC1xx produit de fortes pulsations énergétiques. Assurez-vous que les
sorties sont bien connectées et que les fils de sortie et les charges sont
bien à l’abri d’éventuels courts circuits. Une fois l’appareil éteint, l’énergie
résiduelle reste stockée dans le RC1xx pendant environ 15 secondes.
Le RC1xx ne dispose pas de système complet d’isolation des entrées et
sorties.
Les transitoires causés par les charges inductives doivent être supprimés à
l’extérieur du RC1xx.