RC1xx LED Lighting Controllers - User Manual
—
9
—
Attention : Ce produit est de catégorie A. Son utilisation en zone
résidentielle peut causer des interférences radio, et devra alors être
évitée sauf si des mesures spéciales ont été prises par l’utilisateur pour
restreindre les émissions à un niveau permettant la réception des
transmissions radiodiffusées.
4.3
Général
Le RC1xx ne doit pas être utilisé dans une situation où toute panne
de celui-ci mettrait en danger la santé des personnes ou risquerait
d’endommager d’autres équipements.
Si l’appareil est utilisé d’une manière différente de celle recommandée par
le fabricant, la protection offerte par l’appareil pourra en être altérée.
4.4
Clause de non-responsabilité
Ces informations sont seulement à titre indicatif. Les installateurs doivent
établir leur propre évaluation de risques pour chaque installation. Gardsoft
Vision a préparé minutieusement ces conseils, mais Gardasoft Vision
déclinent toute responsabilité concernant les dommages de toute nature à
l’exception de ceux requis par la loi.
Les actes malveillants d’endommagement et de vandalisme ne sont pas
couverts par ce document et doivent être pris en compte par l’installateur.
5
Mounting the RC1xx
Mount the RC1xx unit vertically or horizontally on the DIN rail to allow the
display to be read easily.
5.1
Environmental considerations
If the average output power exceeds 15W, the RC1xx must be mounted
vertically to allow air to pass through it. Leave 25mm clear either side of
the RC1xx to aid cooling.