RC1xx LED Lighting Controllers - User Manual
—
24
—
10.2.2 Setting the light rating
Press and hold
SEL
for 1 second and follow the keystrokes below:
CH1
is displayed. Use the
and
buttons to scroll to
rAt
.
Press the
SEL
button.
Use the
and
buttons to select the
method you require to set the rating of the
light:
Cur
for current and
Vol
for voltage.
Press the
SEL
button.
Use the
and
buttons to set the
current in Amps and the voltage in Volts.
Press the
SEL
button.
The light’s rating is set up.
10.2.3 Setting up continuous output
Press and hold
SEL
for 1 second and follow the keystrokes below:
CH1
is displayed. Press the
SEL
button.
Use the
and
buttons to select
SCo
(other options displayed are
SPu
and
SOn
). Press the
SEL
button.
bri
is displayed. Press the
SEL
button.
Use the
and
buttons to select the
required brightness from 1% to 99%. Press
the
SEL
button.
Use the
and
buttons to set the Error
Detect flag:
F E
is enabled,
F-E
is disabled.
Press the
SEL
button.
Continuous output is set up.