RTxxx LED lighting controllers - User Manual
If your light is voltage rated, use the
p
and
q
buttons to select
Uol
and press the
SEL
button.
For current rated lights, use the
p
and
q
but-
tons to set the rating in Amps, and press the
SEL
button.
Or...
For voltage rated lights use the
p
and
q
but-
tons to set the rating in volts, and press the
SEL
button.
The light's rating is set up and the RT200 is
ready to use.
9.3
Setting up continuous output
Press and hold
SEL
for one second ,
CH1
is displayed. Use the
p
and
q
buttons to select the channel you want to set up, and follow the
keystrokes below:
The channel you want to set up is displayed.
Press the
SEL
button.
—
33
—
