CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
6
Turn over the assembled tabletop (A& B) and place
it onto the assembled body. Insert a short bolt (Ga)
through a metal washer (Gd), through the tabletop (A)
and into the side panel (E) for each hole. See Fig. 6.
Do not tighten. Adjust the plastic receiver positions
on the rim by sliding back and forth when necessary.
Insert a long bolt (Gb) through a metal washer (Gd),
through the U shaped tabletop bracket, and into the
side panel (E) for each hole. See Fig. 7. Do not
tighten. Insert a long bolt (Gb) through a metal
washer (Gd), through the T shaped tabletop bracket
and into the side panel (E) for each hole. Do not
tighten. See Fig. 8. Repeat procedure for the right
panel (F) the right tabletop (B).
Tighten all bolts. You can readjust level by
twisting knobs on the bottoms of the legs as desired.
Your bar table is ready for use.
4
Fig. 7
Fig. 8
Fig. 6
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Call toll-free:
800-457-4652
Please refer to part numbers when reordering
sears.com
7
E
B
F
Gb
Gd
Ga
Gd
Gb
Gd
A
