11
COLD ENGINE STARTING
CONTINUIED
3.
Move choke lever to choke posi
ti
on
NOTE: In the choke position, always move the lever to the Farthest choke position possible
4.
Push rocker switch to the ON po
siti
on
5.
Squeeze the thro
tt
le control with the right hand. Grasp the starter rope handle and pull out slowly un
til t
he tension
becomes slightly harder. Without le
tti
ng the rope retract, pull the starter rope with a rapid, forearm stroke. Allow
rope to return to its original po
siti
on. Repeat step un
til
unit engages and allow rope to return to original po
siti
on
each
ti
me it is engaged
NOTE: If the engine fails to engage after trying for 5 to 6 pulls, press the primer bulb 1 time and repeat process
6.
Once the engine is engaged and has started running, move the choke lever to the half-choke po
siti
on un
ti
l engine
runs smoothly
NOTE: Half-Choke position is defined as being half way between Choke and Run
7.
Once unit is running smoothly, move lever to the RUN po
siti
on and engage thro
tt
le to the desired speed
NOTE: Do not let the unit idle for extended periods of time. Always run at FULL throttle speed when possible
8.
In order to stop unit, move rocker switch to the OFF po
siti
on
WARM ENGINE STARTING
1.
Move the Choke Lever to the Choke po
siti
on
NOTE: Choke position is defined as moving the lever to the farest Choke position possible
2.
Con
ti
nue by repe
ati
ng Cold Engine
Starti
ng beginning with Step 4
HOT ENGINE STARTING
1.
Begin with Step 4 of Cold Engine
Starti
ng
2.
If engine does not start, refer to Step 1 of Warm Engine
Starti
ng
MODEL Y2007
MINI CULTIVATOR AND DETHATHER
