Garden Trax Y2007 Instructions Manual Download | Manualshive

Page: 7 / 23

background image

7

SAFETY DECAL

Garden Trax is a leading manufacturer of outdoor power equipment. This unit had been designed and

manufactured with your safety in mind. It has been manufactured with all the reliability you expect from an

industry leader.
Please read this manual in order to gain the necessary knowledge to operate this unit safely and

eﬀ

ec vely.

You will

ﬁ

nd a safety decal that has been placed on the unit itself to remind you to always use safety

ﬁ

rst

when opera ng the unit.
The safety decal is shown below in order to familiarize you with its content. Please review the decal now and

if you have any ques ons regarding its meaning, please reread these instruc ons or contact our service

representa ve.
If the decal on the unit should become faded, worn or damaged in any way during the use of your unit, please
refer to the part number and order a new decal from our authorized service center. The decals are easily
applied and will act as a constant visual reminder to and others to always follow safety instruc ons for the
safe and sa sfying opera on of this unit.

READ THIS INSTRUCTION MANUEL CAREFULLY AND THROUGHLY ! KEEP IT IN

A SAFE PLACE FOR FUTURE REFERENCE.

WARNING! ALWAYS CLEAN THE AREA THAT YOU INTEND TO CULTIVATE. THERE

IS A RISK THAT STONES OR OTHER OBJECTS COULD BE THROWN OUT BY THE

TILLER. ALWAYS KEEP BYSTANDERS AND PETS AT A SAFE DISTANCE.

WARNING! NEVER PLACE FEET OR HANDS UNDER THE TILLER DECK WHILE THIS

UNIT IS IN OPERATION.KEEP LOOSE CLOTHING AWAY FROM MOVING PARTS.

WARNING! ALWAYS TURN OFF THIS UNIT AND DISCONNECT THE SPARK PLUG

WIRE BEFORE CLEANING, TRANSPORTING OR MAKING ANY ADJUSTMENTS.

NEVER LEAVE UNIT RUNNING UNATTENDED.

WARNING! THIS UNIT USES BOTH GASOLINE AND OIL… ALWAYS TAKE EXTRA

PRECAUTIONS WHEN OPERATING OR MOVING THIS UNIT.

MODEL Y2007

MINI CULTIVATOR AND DETHATHER

«
...
5
6
7
8
9
...
»

Summary of Contents for Y2007
























Reviews:

No comments

Related manuals for Y2007

Brand: BAC Pages: 44

Brand: Kaysun Pages: 160

Brand: MRC Pages: 37

Brand: Cole Parmer Pages: 48

SUNJOE TJ603E-RM

Brand: SNOWJOE Pages: 15

Brand: Daikin McQuay Pages: 84

Brand: Greencut Pages: 68

Brand: MTD Pages: 2

Brand: MTD Pages: 1

Brand: MTD Pages: 11

Brand: MTD Pages: 16

Brand: MTD Pages: 16

Brand: MTD Pages: 20

Brand: MTD Pages: 24

Brand: Häfele Pages: 11

Brand: Racing Pages: 22

Brand: Nakayama Pages: 41

Brand: Land Pride Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands