background image

16

GB

8. Technical Data

classicCut (Art. 2402)

classicCut plus (Art. 2403)

Motor power consumption

420 W 

420 W 

Mains voltage / 
mains frequency

230 V / 50 - 60 Hz 

230 V / 50 - 60 Hz 

Filament thickness

1.6 mm 

1.6 mm 

Cutting width

250 mm 

250 mm

Filament supply

6.0 m 

2 x 5.0 m

Filament feed

Tip mechanism

Tip mechanism 

Weight

2.1 kg 

2.4 kg 

Rpm of filament cassette

12,000 rpm 

12,000 rpm 

Work area related emission 
characteristic value  L

pA

1)

85 dB (A)

85 dB (A)

measured / guaranteed 

measured / guaranteed 

Noise level L

WA

2)

94 dB (A)   / 96 dB (A) 

94 dB (A)   / 96 dB (A) 

Hand / arm vibration  a

vhw

1)

< 2.5 m / s

2

< 2.5 m / s

2

Measuring method according to  1) EN 786   2) directive 2000 /14 / EC 

9. Service / Warranty 

GARDENA guarantees this product for 2 years (from date of 
purchase). This guarantee covers all serious defects of the unit
that can be proved to be material or manufacturing faults. Under
warranty we will either replace the unit or repair it free of charge 
if the following conditions apply:

The unit must have been handled properly and in keeping with
the requirements of the operating instructions.

Neither the purchaser or a non-authorised third party have
attempted to repair the unit.

The filament cassette and cassette cover are wearing parts and
are therefore not covered by the warranty.

This manufacturer’s guarantee does not affect the user’s existing
warranty claims against the dealer / seller.

If a fault occurs with your Turbotrimmer, please return the faulty
unit together with a copy of the receipt and a description of 
the fault, with postage paid to one of the GARDENA Service
Centres listed on the back of these operating instructions.

Warranty 

Summary of Contents for 2402









Reviews: