Setting up:
The Water Computer may only be set up vertically
with the sleeve nut to the top to prevent water pen-
etrating into the battery compartment.
The minimum water output to ensure that the Water
Computer functions correctly is 20 - 30 l/h. For
example, at least 10 x 2-litre Drip Heads are required
to control the Micro-Drip-System.
At high temperatures (over 60 °C at the display) the
LCD display may extinguish. This does not affect
the program in any way. When the computer cools
down the LCD display illuminates again.
The max. temperature for the water flow is 40 °C.
v
Only use clear fresh water.
The minimum operating pressure is 0.5 bar, the
maximum operating pressure is 12 bar.
Avoid tensile strain.
v
Do not pull the hose connected to the Water
Computer.
Do not pull the hose connected to the Water
Computer.
DANGER!
This product makes an electromagnetic field while
it operates. This field may under some conditions
interfere with active or passive medical implants.
To decrease the risk of conditions that can possibly
injure or kill, we recommend persons with medical
implants to speak with their physician and the
medical implant manufacturer before you operate
the product.
DANGER!
Small parts can be easily swallowed. There is also
a risk that the polybag can suffocate toddlers. Keep
toddlers away when you assemble the product.
2. FUNKTION
With the Water Computer, the garden can be
watered fully automatically up to 3 times a day at
any time of day (every 8 hours). Sprinklers, a sprin-
kler system or a drip head watering system can be
used for watering.
The Water Computer carries out watering fully auto-
matically according to the set program and can
therefore also be used during holidays. Early in the
morning or late in the evening, evaporation and there-
fore water consumption is lowest.
EN
19
