background image

General Power Tool Safety Warnings  

WARNING ! Read all safety warnings and all 
instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and /
or serious injury. 

Save all warnings and instructions for future 
reference. 

The term “power tool” in the warnings refers to your
mains operated (corded) power tool or battery-
operated (cordless) power tool. 

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents. 

b) Do not operate power tools in explosive 
atmospheres, such as in the presence of flammable
liquids, gases or dust. 

Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while 
operating a power tool. 

Distractions can cause you 

to lose control. 

2) Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adaptor
plugs with earthed (grounded) power tools. 

Unmodified plugs and matching outlets will reduce risk
of electric shock. 

b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. 

There is an increased risk of electric

shock if your body is earthed or grounded. 

c) Do not expose power tools to rain or wet 
conditions. 

Water entering a power tool will increase

the risk electric shock. 

d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or 
moving parts. 

Damaged or entangled cords increase

the risk of electric shock. 

e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. 

Use of 

a cord suitable for outdoor use reduces the risk of 
electric shock. 

f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. 

Use of an RCD reduces the risk 

of electric shock. 

3) Personal safety

a) Stay alert, watch what you are doing and use
common sense when operating a power tool. 
Do not use a power tool while you are tired 
or under the influence of drugs, alcohol or 
medication. 

A moment of inattention while operating

power tools may result in serious personal injury. 

b) Use personal protective equipment. Always 
wear eye protection. 

Protective equipment such as

dust mask, non-skid safety shoes, hard had, or 
hearing protection used for appropriate conditions 
will reduce personal injuries. 

c) Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and / or battery pack, picking up or carrying
the tool. 

Carrying power tools with your finger on the

switch or energising power tools that have the switch
on invites accidents. 

d) Remove any adjusting key or wrench before
turning the power tool on. 

A wrench or a key left

attached to a rotating part of the power tools may 
result in personal injury. 

e) Do not overreach. Keep proper footing and 
balance at all times. 

This enables better control of 

the power tool in unexpected situations. 

f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. 

Loose clothes, jewellery or long

hair can be caught in moving parts. 

g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. 

Use of 

dust collection can reduce dust-related hazards. 

4) Power tool use and care

a) Do not force the power tool. Use the correct
power tool for your application. 

The correct power

tool will do the job better and safer at the rate for 
which it was designed. 

b) Do not use the power tool if the switch does 
not turn it on and off. 

Any power tool that cannot 

be controlled with the switch is dangerous and must 
be repaired. 

c) Disconnect the plug from the power source
and / or the battery pack from the power tool before
making any adjustments, changing accessories, 
or storing power tools. 

Such preventive safety 

measures reduce the risk of starting the power tool
accidentally. 

d) Store idle power tools out of the reach of 
children and do not allow persons unfamiliar with
the power tool or these instructions to operate the
power tool. 

Power tools are dangerous in the hands 

of untrained users. 

e) Maintain power tools. 
Check for misalignment or binding of moving 
parts, breakage of parts and any other condition
that may affect the power tool’s operation. If 
damaged, have the power tool repaired before 
use. 

Many accidents are caused by poorly maintained

power tools. 

f) Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges 
are less likely to bind and are easier to control. 

g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions, taking
into account the working conditions and the 
work to be performed. 

Use of the power tool for 

operations different from those intended could result 
in a hazardous situation. 

GB

11

Summary of Contents for EasyCut 42














Reviews: