17
GB
Problem
Possible Cause
Remedy
Motor cuts out
Blocked by foreign bodies.
1. Switch off the motor, re-
move the mains plug from
the socket and wait until
the Aerator has stopped
rotating.
2. Remove foreign bodies.
3. After approx. 1 minute
switch on the Aerator.
Aerating depth too large (aerator 1. Leave motor to cool down.
cylinder has been adjusted for
2. Set adjustment for wear
wear without wear to the knives).
correctly.
The grass is too tall.
v
Mow the lawn before
aerating (see 3. Function
“Correct Aerating”
).
Aerating results are not
Knife wear on the Aerator
v
Re-adjust the wear compen-
satisfactory
cylinder.
sation. (see Maintenance).
Aerator cylinder is completely
v
Have the Aerator cylinder
worn.
replace by the GARDENA
service.
Lawn has grown too tall.
v
Mow the lawn before using
the Aerator.
If you have any problem with your Electric Aerator, please contact our Customer Service.
8. Accessories
GARDENA Collecting Bag for Electric Aerator EVC 1300
Art. No. 4064
9. Technical Data
Type
EVC 1300 (Art. 4070)
Motor power consumption
1,300 W
Mains voltage / Mains frequency
230 V / 50 Hz
Weight
22kg
Working speed of the aerator
2,980 U / min
Aerating width
32 cm
Wear adjustments
Steplessly up to 10 mm
Working area related emission
characteristic value L
pA
1)
71 dB (A)
Working area related noise level L
WA
2)
85 dB (A)
Vibrations a
vhw
1)
≤
2.5 m / s
2
Measuring method according to 1) EN 60335-1 2) Directive 2000 /14 / EC
