en
14
3.2.3.2 To deactivate the Eco mode:
v
Push the Eco button
(e)
on the control panel.
The Eco mode is deactivated and the LED
(Le)
is off.
3.3 To adjust the cutting height [ Fig. O5 ]:
The cutting height can be adjusted from 35 – 65 mm in 4 positions.
3.3.1 To reduce the cutting height:
v
Push the button
(20)
and push the handle
(21)
down to reduce the cutting
height.
3.3.2 To increase the cutting height:
v
Push the button
(20)
and pull the handle
(21)
upwards to increase the
cutting height.
3.4 To mow with the grass catcher box [ Fig. O6 ]:
DANGER!
Cutting injury due to the blade!
Risk of cut injury due to accidental starting.
v
Do not put your hands in the discharge opening.
3.4.1 To put the grass catcher box into the mower:
1. Lift the protective flap
(22)
.
2. Put the grass catcher box
(23)
into the mower by the catcher box
handle
(12)
.
Make sure that the grass box is securely connected.
3. Start the mower.
3.4.2 To Empty the grass catcher box:
The level indicator
(24)
opens during mowing. When it closes during
mowing, the grass box is full.
1. When the grass catcher box
(23)
is full, stop the mower.
2. Lift the protective flap
(22)
.
3. Remove the grass catcher box by the catcher box handle
(12)
.
4. Empty the grass catcher box
(23)
.
3.5 To start / To stop the mower [ Fig. O1 / O7 ]:
DANGER!
Risk of physical injury!
Risk of injury if the product does not stop when the start lever is
released.
v
Do not bypass the safety devices or switches.
v
For example do not attach the start lever to the handle.
3.5.1 To start the mower:
The product is provided with a two-handed safety device (start lever and
safety interlock) to prevent the product from being turned on by accident.
There are two start levers
(26)
. Either one has to be used to start.
We recommend using only the 4 Ah batteries P4A PBA 18V/72
(Art. 14905) or larger.
1. Open the cover
(18)
of the battery holder
(D)
.
2. Put the batterie
(B)
into the battery holder
(D)
until it audibly engage.
3. Put the safety key
(19)
into the mower and turn it to position 1.
4. Close the cover
(18)
of the battery holder
(D)
.
5. Push the safety interlock
(25)
with one hand and pull the start lever
(26)
with the other hand to the handle.
The mower starts and the battery charge status indication
(P)
is
displayed for 5 seconds.
6. Release the safety interlock
(25)
.
3.5.2 To stop the mower:
1. Release the start lever
(26)
.
The mower stops.
2. Turn the safety key
(19)
to position 0 and remove it, to prevent the battery
from discharging.
3.6 Hints to mow:
3.6.1 Hints to use the mower:
If grass residue is left in the discharge opening, pull the mower backwards
about 1 m so that the grass residue can drop out downwards.
To produce a well-maintained lawn, we recommend to cut the lawn
regularly once a week if possible. The lawn becomes denser if you cut
it frequently.
After relatively long cutting intervals (holiday lawn), first of all cut in one
direction with the highest cutting height and then cut in the crosswise
direction with the required cutting height. This prevents a possible block-
age of the blade by too much grass residue.
If possible, only cut the grass when it is dry. If the grass is damp, the
cutting pattern will be uneven.
3.6.2 Cutting performance and battery charge:
The lawn area which can be cut on each battery charge depends on
several factors such as moisture, grass density and cutting height. In order
to ensure an optimal use of space, do not turn the mower on and off too
frequently as this severely reduces the battery running time. The cutting
performance for each battery charge can be ideally utilised by increasing
the cutting height and frequent mowing.
The Eco mode reduces the motor speed to 3100 rpm for a maximum
battery lifetime.
3.6.3 Lawn area per battery charge:
System Battery 4.0 Ah
max. 200 m²
System Battery 5.0 Ah
max. 250 m²
System Battery 6.0 Ah
max. 300 m²
4. MAINTENANCE
DANGER!
Cutting injury due to the blade!
Risk of cut injury due to accidental starting.
v
Use gloves.
v
Wait for the blade to stop.
v
Remove the safety key.
v
Remove the batterie.
4.1 To clean the mower:
DANGER!
Risk of physical injury!
Risk of injury and risk of damage to the product.
v
Do not clean the product with water or with a water jet (in particular
high-pressure water jet).
v
Do not clean with chemicals including petrol or solvents. Some can
destroy critical plastic parts.
The airflow slots must always be clean.
v
Clean the overside and underside of the mower after each use.
4.1.1 To clean the overside of the mower:
1. Clean the overside with a damp cloth.
2. Clean the airflow slots and the grass box with a soft brush
(do not use sharp objects).
4.1.2 To clean the underside of the mower [ Fig. M1 ]:
1. Lay the mower on its side carefully.
2. Clean the underside, the blade and the discharge opening
(27)
with
a soft brush (do not use sharp objects).
4.1.3 To clean the grass catcher box:
v
Clean the grass catcher box with a soft brush (do not use sharp
objects).
14632-20.960.02.indd 14
14632-20.960.02.indd 14
25.07.22 10:57
25.07.22 10:57
