To replace the blade:
DANGER! Risk of injury!
Cut injury when the blade turns and it is damaged,
bent, out of balance or has chipped edges.
v
Do not use the mower when the blade is damaged, bent,
out of balance or has chipped edges.
v
Do not regrind the blade.
The GARDENA spare parts are available from your GARDENA dealer
or from the GARDENA service.
Only use an original GARDENA blade:
• GARDENA replacement blade Art. 4103.
v
Let the blade replace by the GARDENA Service or a specialist
dealer authorised by GARDENA.
Problem
Possible Cause
Remedy
Mower does not start
Battery is not put completely into
the battery holder.
v
Put the battery completely into
the battery holder until it audibly
engages.
On LED is off.
v
Push the On/Off button.
Safety key is not in positon 1.
v
Turn the safety key to
position 1.
Blade is blocked.
v
Remove the obstacle.
Engine is jammed and
makes a noise
Blade is blocked.
v
Remove the obstacle.
Cutting height is too low.
v
Raise the cutting height.
Loud noises, the mower
is rattling
Screws on engine, its fixing or
on the mower housing are loose.
v
Let the screws be tightened by
an authorised specialist dealer
or the GARDENA Service.
Mower runs unevenly or
vibrates strongly
Blade is damaged / worn or the
blade mounting is released.
v
Let the blade be tightened
or replaced by an authorised
specialist dealer or the
GARDENA Service.
Mower runs unevenly or
vibrates strongly
Blade is very dirty.
v
Clean the mower (see
4. MAINTENANCE). If this does
not rectify the problem, contact
the GARDENA Service.
Lawn is not cleanly mowed
Blade is blunt or damaged.
v
Let the blade be replaced by
the GARDENA Service.
Cutting height is too low.
v
Raise the cutting height.
Error-LED
ç
on the control
panel flashes
ß
Wp
Over current, engine is blocked.
v
Remove the battery and remove
the obstacle.
Over temperature.
v
Let the product cool down.
23
EN
