background image

21

20

The pre-programming takes into consideration the 30 minute 
break required between the programs as well as a minimum 
watering time of 30 seconds (display:

11

min.).

This watering time is required to allow the Automatic Water
Distributor to switch to the next outlet and to ensure that the 
order of the watering programs to the appropriate watering 
line is retained.

The watering days entered for the watering program are valid 
for all other watering programs.

You can alter the watering starting times and watering times 
pre-programmed by the Water Computer to meet your personal
requirements. However, if you do not take into account the break
times mentioned above, any changes you make are not accepted
and an error message appears on the display (

EERRRROORR

).

Since it is very easy for watering times to overlap slightly, espe-
cially when the beginnings and ends of programs are very close
together, it is sensible to RESET the Water Computer and to 
re-enter the watering data to prevent an error message appearing.

If the watering programs are switched off after you have con-
firmed the 

special

function (status indicator on 

Off Prog.

) all the

programs which begin in this time are shortened to the minimum
watering time of 30 seconds (display:

11

min.) This ensures that 

the order of the watering programs to the appropriate outlet of 
the Automatic Water Distributor is retained.

Error message (

EERRRROORR

On / Off Prog.

By briefly opening the water flow the outlets on the Automatic
Water Distributor are switched further so that when the watering
programs are reactivated 

(% Run-Time)

the original order of the

outlets for the required watering program is retained.

When using the Water Computer C 1060 prof together 
with the Automatic Water Distributor, 

Soil Moisture Sensor 

(Art. No. 1187) 

or 

Rain Sensor electronic (Art. No. 1189) 

please note the following :

If the 

special

function is activated and the Soil Moisture or 

Rain Sensor indicates sufficient moisture, watering is interrupted.
The watering time of following watering programs is shortened 
to 30 seconds (display:

11

min.) until the Soil Moisture / Rain

Sensor allows the watering programs to be resumed. The water-
ing time originally entered then begins.

Shortening the watering time when the soil is sufficiently moist
ensures that the automatic water distributor is switched to the 
next outlet and therefore ensures that the correct order of the
watering program for the respective distributor outlet is retained.

Soil Moisture Sensor / 
Rain Sensor 

GB

GB

Summary of Contents for Profi C 1060



















Reviews: