gardenature.co.uk
801 Fowler Road, Oakwood Business Park North, Clacton on sea, Essex. CO15 4AA
Tel: 01255 429931 Email: customerservices@gardenature.co.uk
Vat No. 170 7128 21 / Company Reg No 05604321
This IP colour camera has been primarily designed for use in
Gardenature nesting boxes where it will produce colour images
down to extremely low light levels, but it is very capable of
many other applications too! This 2-megapixel IP camera
incorporates latest technology 'Starlight Imaging' and 'IR-Cut'
filtering which together produce the most stunning high
definition HD 1080p colour images.
This high spec IP camera utilises a built-in light sensor that
gradually switches the x10 night vision LEDs supplementing
loss of light with an invisible infrared (IR), this produces sharp
black & white images in complete darkness for 24-hour
viewing.
It is important to remember that when installing this
type of camera into your own nest box or enclosed habitat that
it will produce B&W images if there is not enough natural light
.
The camera also houses a highly sensitive microphone, so you
can hear as well as see what's going on. The camera has a
4mm lens producing the ideal 92 degree viewing angle.
The lens has been pre-focused, but it
can very easily be
adjusted to suit other applications if required.
This camera is not waterproof, it must be positioned in a
sheltered enclosure such as a Gardenature camera ready bird
box or habitat such as a hog box, aviary, rabbit hutch, dog
kennel or even up in the eaves of your house, the list of
possibilities is endless. We advise you not to fix the positioning
until you have viewed the day/night camera image.
STEP 1: Before you start.
Please read these instructions all the way through and then
initially set up your IP Camera Kit indoors to familiarise
yourself with the connection procedures and to ensure
everything is working.
Cables are not covered under warranty
once they have been installed
STEP 2: Camera to Router quick set up.
Do not fit the weatherproof RJ45 connector together until you
have tested your camera and are ready to permanently install
the kit outside. (see Step 5 overleaf)
1. Observing the clip position connect the non-booted
end of your long cable into the camera port.
2. Connect the other end of the long cable into the POE
injector port marked
‘POE’
3. Connect the short cable into the POE injector port
marked
‘LAN’
4. Connect the other end of the short cable into a spare
RJ45 port on your router
5. Plug the mains lead into you POE injector and the
other end into a mains power socket and turn on.
The 12vDC input at the camera is only used where a POE
injector is not in use and the project requires direct 12vDC
power to this port.
STEP 3: Viewing your Camera via an App
To view your Network IP camera on a smart phone or tablet
you will need to download a compatible App from Apple, Play
or Amazon store.
The App we recommend to download is called
XMEye
Once installed, you can open the programme and register
yourself with a free account for viewing from anywhere, or you
can click on
‘Local Login’ in the bottom left of your screen.
NB ‘Local Login’ will only allow you to view the camera when
you are on the same network.
To add your camera / device
.
Press the + icon in the top right of the screen on your device
then follow the steps scanning the QR code on your camera:
When complete you should be able to view live and record the
camera on your mobile device or tablet.
Take note that the blue light on the connector at the camera is
to confirm power, and the flashing green light confirms that
data is being received.
IP Nest Box
Camera
1080p HD Colour with Audio & Infrared night vision.
2 Megapixel, Starlight imaging
2M
11
