USER MANUAL FOR GB-S3.1 WOOD CHIPPER
10
GUIDE TO REPLACE BLADE
1. Turn engine off as per instruction.
2. Pull the plug cap from the spark plug.
3. Remove Bottom Feed Hopper.
4. Open and remove Front Window Cover Plate.
5. Use Allen key to make the bolt on blade unmovable, use
13mm socket spanner to UNSCREW the opposite nut,
and then unfix blade.
After unscrewed each locknut MUST be replaced by new
one for keeping lock function.
6. Once again use Allen key to make the bolt on blade
unmovable, use 13mm socket spanner to SCREW the
opposite nut until it is tightening enough. Torque: 28-32
N
·
m
Socket spanner
Allen key
WARNING
WEAR RIGGERS GLOVES FOR
THE BLADE CHANGING
OPERATION.
7. Install bottom feed hopper.
