USER MANUAL FOR GB-S3.1 WOOD CHIPPER
14
HAZARDOUS MATERIALS END OF MACHINE LIFE
During Machine Life
The following hazardous materials are supplied within EFCUT machine
：
Engine oil
Petrol
Copper Ease
MATERIAL SAFETY DATA SHEETS FOR HAZARDOUS MATERIALS SUPPLIED WITHIN EFCUT
MACHINES ARE AVAILABLE ON REQUEST.REFER TO THESE FOR FIRST AID AND FIRE
PROTECTION MEASURES.
Always follow recommended procedures for safe handling, removal and disposal of hazardous materials. Safety
precautions should be taken when handling hazardous materials(use of oil-resistant gloves and safety glasses are
recommended-respiratory protection is not required).Avoid direct contact with the substance and store in a cool,
well ventilated area avoiding sources of ignition, strong oxidizing agents and strong acids. Ensure hazardous
spillages do not flow into the ground or drainage system and ensure potential environmental damage is controlled
safely, according to local laws.
End of Machine Life
Follow these guidelines using approved local waste and disposal agencies for recycled materials, according to
applicable Health, Safety and Environmental laws.
Position the machine within reach of all necessary lifting equipment.
Use tools and PPE detailed within maintenance instructions.
Remove all hazardous materials and store safely before disposal.
Disassemble the machine structure, referring to the maintenance instructions. Pay attention to parts with
mechanical pressure or tension applied, including springs.
Separate items that continue to have a service life.
Separate worn items into material groups and where possible, recycle using available agencies for recycled
materials. Common types are
：
Steel
Plastic materials
Non-ferrous metals
Rubber
Aluminum
Electrical and Electronic Components
Brass
Other materials that can be recycled
Copper
Other materials that cannot be recycled
If a part is not easily separated into different material groups, it must be added to “general discarded materials'".
Do not burn discarded materials.
Change the machinery records to show that the machine is out of service and discarded.
