Gardener’s Choice Grass Trimmer User Guide
5
Attaching the handle.
Place the upper ergonomic handle
(
Figure 1)
over the sliding sleeve in the
desired position, then while holding the
bottom plate in place underneath insert
the screws and tighten with the allen key
provided.
Attaching the
safety guard.
While placing the Grass Trimmer on its
back, clip the guard onto the shaft lining
the holes up with the guides see
(Figure 2)
then locate the bolt through the guard and
guide plate as indicated. Place the washer
over the bolt and tighten wing nut.
Attaching the
trimmer head.
Insert the allen key provided into the hole
on the gear head to stop it from rotating.
Then wind the trimmer head
clockwise
onto the head (
Figure 3).
Figure 1.
Figure 2.
Figure 3.
5285 Gardeners Choice Trimmer Manual FA.indd 5
5285 Gardeners Choice Trimmer Manual FA.indd 5
7/4/09 3:40:13 PM
7/4/09 3:40:13 PM
