6
Gardener’s Choice Grass Trimmer User Guide
Take approximately 4-5 metres of 2.0-
2.4mm diameter trimmer, fold in half to
make a loop. Hold the spool as shown
in
(Figure 4)
and hook the loop onto the
divider plate as shown and wind the
line, one on either side of the divider
plate.
Wind both lines
clockwise
on both
sides of spool ensuring that both lines
remain in their respective channels see
(Figure 5).
In order to stop the line from
unravelling, slip each end into the lugs
on the bottom edge of the spool see
(Figure 6).
Insert ends of lines through holes in
side of spool casing and place the
spool into the centre of the casing see
(Figure 7)
.
When in position pull the ends further
out of the casing.
Then return the lid, click into place and
return to hub.
Replacing trimmer line.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
5285 Gardeners Choice Trimmer Manual FA.indd 6
5285 Gardeners Choice Trimmer Manual FA.indd 6
7/4/09 3:40:19 PM
7/4/09 3:40:19 PM
