30
The drain plug (15) is located to the right of the transmission casing.
• Lay the cultivator on his left side and the transmission clean to prevent dirt and
debris from entering before removing the drain plug.
• Using a hex wrench 5 mm, unscrew
the cap and empty the grease transmission.
used
• Using an oil can grease, add high
quality grease for automotive until the fat
starts to ooze around the hole.
• If necessary, remove the
strawberries.
• Replace the drain plug.
2. Cleaning
• Cleaning the exterior parts and
plastic parts: once the machine
disconnected, use a damp cloth with mild
soap.
• Never immerse the machine. Do not
use abrasives or harsh cleaning agent (alcohol, petrol, etc.).
• After each use, clean the chain with a soft brush and lubricate with an oil-soaked
rag and spray a thin layer of oil throughout the chain.
• Keep air vents clear. Clean air vents with a soft brush or brush.
• In case of problems or for a thorough cleaning, see the After Sales Service.
3. Storage
• Keep the product, the instruction manual and accessories in the original packaging.
• Clean the tool before storing.
• apply a light coating of oil over the entire surface of the chain.
• It is recommended to store the product in a clean, dry, dry, cold and dust, and place
it out of reach of children, both in height is locked.
• Do not store the product at temperatures below 0ºC.
• Do not place / store the product.
4. Transport
• Turn the unit off and unplug it before moving anywhere.
• Assemble all the packaging, if any.
• Always carry the unit by holding the handle.
• Protect the device against the risk of shock or vibration to which it may be
subjected while traveling by vehicle.
• Hold it in place so it can not slip or fall.
5. Troubleshooting
The following table shows the types of faults and tells you how you can fix it if your
machine is not working properly. If despite this you do not locate the problem and solve it,
contact your after-sales service.
