EN
©
2021 GARDENIC. All rights reserved
Irrigation controller
10
If any of the above items is missing or damaged, please contact your dealer.
You can obtain a free printed version of the manual with the large font size or download it
from the web address below:
https://mptech.eu/qr/gardenic
Device construction
Installation and use
The temperature of the environment during operation and storage should be higher than
0°C. Freezing water can damage the unit.
The sieve filter must always be located in the water inlet of the controller. Regardless of the
appliance, only a source of clean, filtered water should be connected so that no dirt can get
into the appliance and damage its components.
Do not pull on the hose connected to the appliance as this may cause permanent damage.
Do not install the device in areas exposed to flooding from rainwater or under running
sprinklers.
Filter
LCD display
OK button
Programmer knob,
on/off switch
Water
inlet
+ button
Water
outlet
