38
Caution! Any maintenance or function change actions must be performed when
the device is unplugged.
Blower function:
•
Connect both blower attachments (8) together and insert into the blower air
outlet (3). Check whether the blower attachments are locked into place.
•
Set the lowest available value on the RPM adjuster (2) and plug in the device.
•
The blower is ready for use.
Caution! The device will not start if the shredder grid (14) is not firmly
tightened using the shredder grid fixing screw (4).
If the device does not start, check whether the blower attachments (8) are
correctly installed on the device.
7.2 Leaf vacuum installation
Warning! When installing any parts, the device must be disconnected from
the power source!
Leaf vacuum function
The leaf vacuum function allows to suck in a small volume of leaves. In this
function, the device works as a shredder to effectively reduce the volume of
leaves sucked in. The shredding level depends on the type/size and humidity of
the leaves.
CAUTION!
You must not suck in items such as glass, stones and pebbles, gravel,
sand, twigs and branches, as they might damage the shredder parts or the bag.
Do not suck in water and other very wet items. Water may penetrate the device
