44
•
Remove the leaf bag installation clamp (10) from the vacuum attachment hook.
Open the zipper and empty the leaf bag (6).
1 .
Select the device function (leaf blower, or leaf vacuum with leaf shredder)
and install the relevant accessories.
2 .
Set the lowest value on the RPM adjuster (2).
3 .
Connect the device to the AC source, the parameters of which correspond
to the ones indicated on the device’s rating plate. Use an extension cord.
4 .
Grab the device firmly by the auxiliary handle and put the shoulder strap
over the shoulder.
5 .
Press and hold the on/off switch (1).
6 .
To turn the device off, release the on/off switch (1).
7 .
Disconnect the device from the AC power source after use.
Caution! After turning the device off, the rotor continues moving due to inertia.
Be very careful. Risk of injuries.
Increase the RPM gradually, from the lowest to the maximum value. When
operating the device at the highest RPM, hold a stable position, watch out for
bystanders and the material sucked in.
