8. For felling or cross-cutting, the spike bar (claw stop) must be applied to the wood
to be cut. The use of the spike bar is also recommended when cutting through
thick branches.
9.
Before every cross-cut, firmly position the spike bar and only then saw into the
wood with the chainsaw running. The saw is then lifted up using the rear grip and
guided using the front handle. The spike bar acts as a pivot point. Repositioning
is done using light pressure on the front handle. Pull the saw back slightly to do
this. Insert the spike bar deeper and lift up again using the rear grip.
Use only admitted chain saw and chain bar combination
The cutting equipment supplied is optimally matched to this chain saw.
When pairing of components do not match, the cutting attachment can be
irreparably damaged after only a short operating time and cause injury.
m
NOTICE
The following information is mainly for the end user or the infrequent user. This
chainsaw has been designed for occasional use by home owners, garden owners
and campers, for general work such as clearing, cutting firewood etc. It is not
intended for longer work. During longer work, because of vibrations, there is a risk of
circulation problems in the user‘s hands (white-finger-syndrome).
White-finger-syndrome is a vascular disease where the small blood vessels in
fingers and toes contract seizure-like. The affected areas are no longer supplied
with blood and therefore look very pale.
Frequent use of vibrating machines can cause nerve damage in people whose
circulation is compromised (e.g. smokers, people with diabetes).
If you notice unusual impairment, immediately stop the work and consult a doctor.
Observe the following notices in order to reduce risks:
• Keep your body, and particularly your hands, warm in cold weather.
• Take regular breaks during which you should move your hands to promote
circulation.
• Ensure the lowest possible vibration of the machine by regularly maintaining it
and keeping components tight.
AFTER SALES SUPPORT
21
00800 4003 4003
aldi.service.uk@scheppach.com
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Petrol chainsaw 41cc
Safety regulations
