XI. STORAGE
m
CAUTION
Never put the equipment into storage for longer than 30 days without carrying out
the following steps.
If you intend to store the equipment for longer than 30 days, it must be
prepared accordingly.
Otherwise the fuel still remaining in the carburettor will
evaporate and leave a rubbery sediment. This can cause problems when starting up
the equipment and may require expensive repairs.
1. Slowly remove the fuel tank cap to release any pressure that may have formed
in the tank. Carefully empty the tank of fuel.
2. To remove the fuel from the carburettor, start the engine and let it run until the
equipment stops.
3. Leave the engine to cool (approx. 5 minutes).
4. Remove the spark plug. You will need the supplied combined spark plug
wrench/screwdriver.
5. Add one teaspoon of 2-stroke engine oil into the combustion chamber.
6. Slowly pull the starter cord several times to apply a layer of oil to all internal
parts. Refit the spark plug.
Putting the equipment back into operation
1. Remove the spark plug.
2. Quickly tug on the starter line to remove excess oil from the combustion
chamber.
3. Clean the spark plug and check that the electrode gap is correct, or insert a new
spark plug with the correct electrode gap.
4. Prepare the equipment for operation.
5. Fill the fuel tank with the relevant mixture of fuel and oil.
6. Top up the chain oil in the chain oil tank.
XII. TRANSPORT
To transport the equipment, empty the petrol tank. Clean coarse dirt off the equip-
ment with a brush or hand brush.
AFTER SALES SUPPORT
51
00800 4003 4003
aldi.service.uk@scheppach.com
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Petrol chainsaw 41cc
Storage/Transport
