Troubleshooting
Problem
Possible cause
Remedy
The device
1
cannot be
switched on.
The mains plug is not
correctly plugged in.
Check that the mains plug
fits properly.
The socket has no power.
Check the socket by
connecting a different
device to it.
The device is defective.
Have the device repaired
by the manufacturer, their
customer service or a
similarly qualified person.
The tilt protection
11
has
triggered or is blocked.
Make sure that the device is
set up in an upright
position on a level surface
and/or that the tilt
protection switch on the
bottom of the device can
move freely.
The device switches off
automatically during
operation.
The overheat protection
has triggered.
See section "Overheating
protection".
The tilt protection has
triggered.
Make sure that the device is
set up in an upright
position on a level surface.
If the problem persists, contact the customer service listed on the last page.
Cleaning
WARNING!
Danger of burns!
The device gets hot during operation. You could burn
yourself.
- Let the device cool down completely before any cleaning
or maintenance.
Troubleshooting
15
